Dismiss Notice
New Cookie Policy
On May 24, 2018, we published revised versions of our Terms and Rules and Cookie Policy. Your use of AstronomyConnect.com’s services is subject to these revised terms.
View the Latest Parts And Accessory Reviews
Item
Submitted By
Agena Filter Storage Case for Four 1.25" Filters
Perfect safe storage
I bought 4 cases for my 13 filter set and the filters fit perfectly. The cases are easy to open but secure and don't fall open. I have the filters positioned so that I can read the filter grade through the side of the case.
I bought 4 cases for my 13 filter set and the filters fit perfectly. The cases are easy to open but secure and don't fall open. I have the filters positioned so that I can read the filter grade through the side of the case.
ZWO ASI120MC-S 1.2 MP CMOS Color Super Speed Astronomy Camera with USB 3.0 # ASI120MC-S
Easy to use
Easy to use
Easy to use
Baader Takahashi / Vixen M36.4 Male to T2 Male Camera Adapter # T2-03 1508039
Baader Takahashi / Vixen M36.4 Male to T2
I had lost part of the extension tube that threads into the sled focuser on my older Celestron C6 Newtonian. This adapter fits that thread and transitions to a T2 thread. I had some T2 extension tubes and this allowed me to keep my sled focuser. I al...
I had lost part of the extension tube that threads into the sled focuser on my older Celestron C6 Newtonian. This adapter fits that thread and transitions to a T2 thread. I had some T2 extension tubes and this allowed me to keep my sled focuser. I al...
Blue Fireball 1.25" to 0.965" Eyepiece Adapter # E-04
Well made, works as advertised
Did just what I needed -- enabled using some classic 0.965" eyepieces in a 1.25" eyepiece holder.
Did just what I needed -- enabled using some classic 0.965" eyepieces in a 1.25" eyepiece holder.
Agena Flexible Slow Motion Cable with Rosette Handle - 11.5"
Works with some modification
I was able to drill this out to fit a Tasco 10TE mount, which has a shaft larger than 6mm. The end has plenty of metal to take out another mm, and the lock screw still has enough thread to work well.
I was able to drill this out to fit a Tasco 10TE mount, which has a shaft larger than 6mm. The end has plenty of metal to take out another mm, and the lock screw still has enough thread to work well.
GSO 2" Crayford Focuser for Reflectors - Dual Speed
Very Nice
Very nice focuser.. fit perfectly on a 12" Meade Light Bridge. No modifications needed to be made. I installed it in under 5 minutes. 303mm base plate was a direct fit.
Very nice focuser.. fit perfectly on a 12" Meade Light Bridge. No modifications needed to be made. I installed it in under 5 minutes. 303mm base plate was a direct fit.
Jun 12, 2019
David Chandler's Night Sky Planisphere (Large)
Best one on the market,
Best one on the market, easiest to use.
Best one on the market, easiest to use.
William Optics 2" to 1.25" RotoLock Eyepiece Adapter # F-ROTO-A2-125
Great Setup
Works well. After realizing my expensive camera was being held by a thumbscrew I chose this. Hold camera solidly and evenly. Excellent design.
Works well. After realizing my expensive camera was being held by a thumbscrew I chose this. Hold camera solidly and evenly. Excellent design.
Celestron T-Ring for Canon EOS Camera # 93419
Works as advertised.
Works as advertised.
Works as advertised.
GSO 2' Crayford Focuser for SCTs - Single Speed
Well made...
Top-drawer stuff. Happy with. But only useful on my 8" SCT scope. Not enough clearance for a 5 or 6 in SCT, in my case. Sure helps an SCT scope focus more like my good refractors, with mm focus tube increments.
Top-drawer stuff. Happy with. But only useful on my 8" SCT scope. Not enough clearance for a 5 or 6 in SCT, in my case. Sure helps an SCT scope focus more like my good refractors, with mm focus tube increments.
Blue Fireball 1.25" to 2" Eyepiece Adapter # E-05
Nice Product
To find an adapter for the SBIG STL line to work with the Tak 60 refractor was a bit of a challenge but this baby works perfect. Solid construction. The STL is a heavy camera and that little 60 scope needed the right adapter.
To find an adapter for the SBIG STL line to work with the Tak 60 refractor was a bit of a challenge but this baby works perfect. Solid construction. The STL is a heavy camera and that little 60 scope needed the right adapter.
Rigel Systems Aline 1.25" Telescope Alignment Eyepiece / Collimation Cap
Works great on f 6
Works great on f 6 systems and higher
Works great on f 6 systems and higher
Blue Fireball 2" Twist Lock Self Centering Eyepiece Extension Tube with 35mm (1.38")...
A very good product, it
A very good product, it works like it should, and keeps the eyepiece centered.
A very good product, it works like it should, and keeps the eyepiece centered.
Blue Fireball 2" Eyepiece Extension Tube with 35mm (1.38") Extension # X-03
recent purchase
it does what it is supposed to
it does what it is supposed to
Agena 50mm Deluxe Straight-Through Finder / Guide Scope with Helical Focuser
Solved my auto-guide issues
I was having trouble getting my oag to work, so I decided to switch to this scope for a "guide scope" solution. My troubles have been solved. I have numerous guide stars to choose from now....and the dreaded "no stars found" messa...
I was having trouble getting my oag to work, so I decided to switch to this scope for a "guide scope" solution. My troubles have been solved. I have numerous guide stars to choose from now....and the dreaded "no stars found" messa...
Tele Vue Barrel Extender for 2" Eyepiece # EBX-2120
Works fine
Provided necessary extra focus length needed for using a Telvue 55mm eyepiece with the Televue-85
Provided necessary extra focus length needed for using a Telvue 55mm eyepiece with the Televue-85
Jun 6, 2019
Blue Fireball T Thread Spacer Ring with 10mm Extension # S-T10
Perfect for what I needed
Perfect for what I needed
Perfect for what I needed
Blue Fireball M48 (2" Filter) Female Thread to T / T2 Male Thread Adapter # T-06
Just what I needed!
Just what I needed!
Just what I needed!
Blue Fireball Eyepiece Holder (2") with SCT Female Thread (SCT Visual Back) # C-01
Blue Fireball 2” SCT visual back
The Blue Fireball 2” SCT visual back works great. But it would be better if they would add another screw hole to allow you to choose where to place the two set screws. When attaching the visual back to your rear opening, one of the two screw hole c...
The Blue Fireball 2” SCT visual back works great. But it would be better if they would add another screw hole to allow you to choose where to place the two set screws. When attaching the visual back to your rear opening, one of the two screw hole c...
Thousand Oaks Four Channel Digital Dew Heater Control Unit # DDHC
Nice items
Nice items
Nice items
Page 6 of 196
