Baader Planetarium's 2" Single Polarizing Filter is designed for perfect light management when viewing bright objects. It reduces passing light by a factor of two. Reducing image brightness can help improve contrast in terrestrial viewing and imaging, especially in daytime photography. A polarizer also helps when viewing the Moon and planets by reducing brightness and glare to make it easier to see fine detail, or it can help split bright binary stars.
Baader's single polarising filter is a perfect complement for their solar Herschel wedge. A particularly handy attribute of the Herschel Wedge is its partial polarizing effect on the solar image. This permits a very convenient means of variably adjusting the image brightness, simply by using a single polarizing filter between the Herschel wedge and the eyepiece. The filter/eyepiece combination can then be rotated, and the image is variably dimmed which is very useful to easily achieve the optimum brightness for maximum visual contrast at any magnification.
This 2" filter (with M485x0.75 threads) is made for Baader in Japan, and it can be threaded on to 2" eyepieces directly. For the ultimate in convenience, we recommend the 2" polarizer attached to a Baader T2-15 (2"/1.25" reducer). This allows you to conveniently switch between 1.25" eyepieces without removing the filter, and still maintaining a close position between the eyepiece and filter. Use of a T2-15 adapter also gives you a very convenient means of attaching and removing the Solar Continuum filter if used.
Please Note: Polarizing filters are intended for visual use and if used for solar viewing, they must only be used in conjunction with the existing internal ND=3.0 filter in the Herschel wedge. A polarizing filter does not provide sufficient blocking by itself, nor is it able to block IR wavelengths as completely as an ND filter. Also, the polarizing filter must be used on the eyepiece or eyepiece reducer, never ahead of the ND3.0 filter (the polarizing filter must be located after the ND3.0 filter to prevent damage to the delicate internal layers of the polarizing filter).
Manufacturer part number: 2408342 or FPOL-2.
Jun 7, 2019
Baader single polarizing filter, 1.25 inchPros: Cons: Comments:
I have a number of Baader filters used for observing planets, the Moon and double stars. Last night I was able to test this polarizer out on some double stars, including Izar, nearly straight overhead. I was using an older Celestron 5 at magnifications up to 255X. Izar was cleanly and completely split with accurate colors of the stars. The filter made it easier to observe. The coarse knurled edge of the filter made it easy to use in the dark. The precise threads worked smoothly in all eyepieces I tried. This filter just became my go to polarizing filter. I don't know why I'd use anything else.
This review was provided courtesy of AgenaAstro.comMar 9, 2017
To split SiriusPros: Cons: Comments:
As with Baader products in general, this is highest quality. I obtained it to optimize the split of Sirius and visualize the white dwarf companion; a German reference had recommended a neutral density filter to reduce the primary's glare, but that made the comes disappear. This single polarization filter, however, does the work just right - cuts down Sirius's overpowering light but does not erase the faint little Pup.
This review was provided courtesy of AgenaAstro.comSort by